Hey People
I am doing a study for the feasibility of a TOD on a metro heavy rail line over here in Australia, but I am having issues finding decent ideas for the rail crossing, ie, level crossing, rail over-road under etc.
Can anyone help me out here?
pls check this siteOriginally posted by Chadles
www.dot.state.ga.us
Thanks, what I am after exactly are examples of rails crossings for TOD’s which work well as transitional areas. I have drawn a few examples below, but I was wondering if anyone had any other ideas.
See in the first example works, but is possibly dangerous; the second example has a too strong transition as either side of the development is separated by the sunken railway.
The third and forth examples try and overcome the issue by having a level railway and raising the road.
(3 and 4 the road goes over the rail via a bridge)
Last edited by Chadles; 07 Aug 2006 at 10:56 PM.
Chadles where are you in Australia? I don't have photos but maybe can give you a couple of examples in eastern NSW if they are convenient for you to visit. PM me if you don't want to post details in public.
I was going to say that also- i have heard a few things floating round about these sorts of developments in Sydney
"Have you ever wondered if there was more to life, other than being really, really, ridiculously good looking?" Zoolander
Hey, Thanks Rem and Natski.
I am in South Oz. There is alot of info about these sorts of developments in WA such as the Village at Wellard, but not alot happening elsewhere.
There's nothing I can help you with in SA, though I thought the tram to Glenelg included some level crossings on it - I can't picture anything in a mixed use neighbourhood though. It's been several years since I was in Adelaide.
In Sydney the light rail service from Central to Pyrmont mingles with some pedestrian and car environments. I think it works really well and there are seemingly no special arrangements in place - though I don't have a transport engineer's eye.
In Newcastle there is a heavy rail level crossing right at the end of Hunter Street (main street), on a street that crosses Hunter Street, that is probably not a good example. A big problem with it is queing areas conflicting with adjacent traffic lights. The locals hate it. You could probably find both examples on Google Earth with a bit of patience and maybe a street directory if you can dig one up. I think queing might be a problem for diagram 3 & 4 in your post above also BTW.
Yeah your right Rem, some of the crossings of the Glenelg Line work well, but the major issue I am having is that there arent really any good examples of heavy rail interfaces.
There is one terrible example of one at Sailisbury where a major road crosses two heavy rails and a freight line. Within 300m there is 4 sets of traffic lights, road and pedestrian boom gates and 2 red light / speed cameras.
In a political response to a bus crash a few years ago, the council just keep adding more infrastructure to control traffic, they even went so far to ban busses crossing there makign them detour an extra 500m or so.
Quote
